Lewitt: LW6 wireless studio headphones

REVIEWED BY Joe Finocchio

Every studio headphone I've owned came with a cable, and I never spent much time thinking about it. There has never been a workable wireless option, so most of us have taken for granted that we'd never have anything with low enough latency to be useful in the studio. The LW6 are Lewitt's first headphones and also the first wireless pair I've used that belong in the studio.

I knew Lewitt through their microphones, which have always looked a little different from everyone else's. The company started in Vienna in 2009, founded by Roman Perschon after a stint at AKG, and almost everything since has been mics and interfaces: the LCT condenser line, the LCT 1040 flagship, and the Connect interfaces. Their mics have turned up on Grammy-winning records, including Bad Bunny's 2026 Album of the Year, DeBÍ TiRAR MáS FOToS.

Inside the box were headphones, a small transmitter, and a generous bundle of cables. The transmitter receives USB-C or an analog input and plugs in from the 1/8-inch out jack to where you'd normally plug in your headphones. I went the analog route and stayed there. From unwrapping the LW6 to hearing audio, including downloading the software, was a few minutes. At first I came out of the front headphone jack on my Grace Design m905 [Tape Op #97], then moved to the cue outputs on the back so I wasn't stacking multiple volume controls. Now I ride level in the app or on the ear cup.

There are two ways to connect wirelessly: Lewitt's RealSound (uncompressed PCM over ultra-wideband at a rated 5.8 ms) and Bluetooth 5.3 with SBC and AAC. That 5.8 ms is the whole point. When a client used the LW6 to cut vocals, they couldn't perceive any latency. I asked if everything was working and got back, "It sounds great." That matters more here than it might elsewhere: my studio doesn't have a separate control room and live room, so when clients track, we’re on headphones. It also means I can walk over and move a mic while listening or check phase on a multi-mic speaker cabinet setup without a cable dragging off my shoulder or pulling at my head. The rated range is about five meters, which isn't a ton but has been workable. There's also an extended-range profile at 6 GHz. The software warns that Wi-Fi can interfere, and I did feel like I stretched how far I could get from the transmitter. My place is also full of concrete, so mostly what stopped me were the walls rather than the distance.

The first thing I noticed was the flat frequency response. Nothing feels hyped, and the imaging and depth are very good. I've been mixing a record for Dante Milano, a young jazz/neo-soul artist, and the moves I made on the LW6 translated to my Amphion One15s and Atomic SixTens [Tape Op #140]. The LW6 let me know when there was too much information in the low end, and the overlap between the upright bass and the kick was easy to find and fix. They're not harsh up top, but they make it clear when you've got a problem in the sibilant range.

Lewitt's claim is open-back sound in a closed design, and to my ears that holds up. They sound like a pair of open-backs, with the isolation of a closed design. I've mostly stayed on the Transparent profile, which is their flat curve, and gone back and forth with the virtual studio monitors emulation. Turn that on, and it actually feels like you're in a control room – I’ll be damned, it sounds a lot like speakers. Pretty impressive. They're also not bulky; the LW6 is closer in size to a normal pair of over-the-ear Bluetooth headphones than to most high-end studio cans. At 358 g they're a little over half the weight of the planar flagships I've used. Over long stretches my ears were noticeably less fatigued than they are with other headphones, albeit a little warm, but I run a little hot.

The Lewitt Headphone software allows for plenty of user-configurable options, like custom button assignments and user-created EQ curve profiles. The loudness guard is worth the software menu time: set a threshold and it ducks the audio back to a safe level on its own. While switching from RealSound over to Bluetooth, my Bluetooth source came in loud, and the guard caught it immediately. The one thing that annoyed me a little was the voice prompt announcing every profile change, but you can limit that to only essential voice feedback in the menu. There's also a multi-unit mode, so a second set of LW6 can share one transmitter. I can be monitoring one pair while a client tracks vocals or cuts overdubs on the other with both of us hearing the same thing. This is version 1.0, and it feels open-ended in a good way, so I’d expect more profiles and new feature sets as new versions get pushed. The DSP runs natively on the headphones so you can access settings with the buttons on the headphones without the software running.

A license for Space Replicator Essential comes with the package. You get Lewitt's own Studio A, the Vienna Synchron Stage, a car with four seating positions, and a nightclub from the floor or the DJ booth with or without an audience. The living room is the funny one: you can hear your mix on various smartphones and laptops in it, presumably from the coffee table, but not on a living room stereo. There are headphone models as well, including an eerily accurate AirPods recreation.

At $699, that's a lot of headphone for the money. What I'd like to see are those emulations running on the headphones themselves via the onboard DSP. Past that, dare I request a wireless cue system where a full band could track without cumbersome headphone cables? Maybe if I talk about it enough and put it out into the ether, Lewitt will bring it to us.