As an engineer/producer who records guitars and basses, I believe that accurate tuning and instrument intonation matter as much as the gear and the performance. Sometimes the music sounds unintentionally micro-tonal when guitarists use capos or play with loose technique. Other times it happens when a guitar or bass needs a proper setup. More often than not, artists tune their instruments with cheap tuners, and it shows in the context of arrangements. When I discovered the Sonic Research Turbo Tuner ST-300 strobe-tuner pedal in 2023, I promptly ordered one. It proved to be a very straightforward and reliable reference for tuning in sessions. Arrangements and recordings sounded better with less stress. When I returned to the Sonic Research website in 2026, the ST-300 had been discontinued and was slated to be replaced with an updated version. Roger Schlichtig at Sonic Research informed me that his company had a new manufacturing partner and that the new pedal would be kept under wraps until a future date when retailers were stocked and ready. After further discussion with Roger, he connected me with a representative from that new manufacturer.
When my review unit arrived, it was branded MXR, and the model name was Turbo Tuner. Below the model name, it reads “Powered by Sonic Research” because Turbo Tuner utilizes the same legendary stroboscopic pitch-detection circuit and classic display format as the ST-300. I noted that the enclosure size, shape, and overall layout of the Turbo Tuner were also unchanged. The enamel finish on the Turbo Tuner looks and feels smoother than the ST-300 powder coat. The ST-300 screen is slightly recessed with four screw heads visible on the front panel. The Turbo Tuner features a flush-mounted screen with no visible screw heads. All of those cosmetic updates result in a more refined appearance. The Turbo Tuner retains the side-mounted audio jacks, internal 9V battery compartment, 9V power input, and 9V convenience output from the ST-300. The ST-300’s micro-USB port has been replaced with a USB-C port on the Turbo Tuner to facilitate firmware updates and preset customization with a software editor. One major upgrade under the hood allows switching between true bypass and buffered bypass. The buffer-activation switch is inside the battery compartment. Switching between the three buffer modes, adjusting screen brightness, and programming custom presets for open tunings or alternate temperaments on the Turbo Tuner is all possible via the front-panel controls.
After using the Turbo Tuner on various instruments and comparing it to the ST-300, I felt confident using them interchangeably. However, I knew that I had to get out of my bubble and asked my assistant engineer Brian Camp to bring over his Korg Pitchblack Advance strobe-tuner pedal for a showdown. Brian plugged in a bass guitar and dialed in the tuning pretty tightly. I immediately switched his signal over to the Turbo Tuner and it read all the strings as slightly flat. Both pedals are stroboscopic, but published specifications explain the measurement discrepancy we observed. The Pitchblack Advance is accurate within +/- 0.1 cents, and the Turbo Tuner is accurate within +/- 0.02 cents. For context, the Peterson Strobostomp HD strobe-tuner pedal – which claims a higher display resolution than other strobe-tuner pedals – is accurate within +/- 0.1 cents. I have no concerns with the display resolution of the Turbo Tuner and ultimately prefer its superior measurement accuracy.
Brian and I also compared the Turbo Tuner buffer to my personal ST-300, which Creation Audio Labs modified to include their compact output buffer. Both buffers are excellent, and the sonic difference between them is negligible. But the Turbo Tuner truly impressed me by delivering the class-leading accuracy of the ST-300 along with some thoughtful upgrades. The Turbo Tuner works beautifully for tuning electric guitars and basses. In Chromatic mode, it can also work for tuning single oscillators on analog synthesizers. I will definitely have at least one Turbo Tuner in regular use at my studio.