Volt 1 Gen 2 & Volt 4P Max USB audio interfaces
When Infrasonic Sound engineer Shay Obray and I co-hosted the "How to Record a Band at Home" YouTube series for Tape Op and Inside Blackbird, gear sponsor Universal Audio supplied us with mics, guitar pedals, interfaces, and software. We chose to record and mix in LUNA [Tape Op #171], which legitimately is a comprehensive, full-featured DAW. To our delight, LUNA also functions seamlessly as the control center for UA's whole ecosystem, including the second-generation of USB-C bus-powered Volt audio interfaces. The original Volts [#148, #152, #171] were UA's first foray into audio interfaces without the DSP that hosted their comprehensive line of UAD DSP/Apollo plug-ins. With the new Volts, onboard DSP has been added, but not to run existing plug-ins; instead, DSP is utilized to implement built-in sonic features. The ability to dial up various sounds while recording is what makes these interfaces unique, regardless of your choice of DAW, while in-LUNA control, automation, and recall are icing on the cake.
The Volt 1 Gen 2 is a compact 2×2 USB-C interface with a single Tone Shaping mic preamp that offers three EQ curves described as Warmth (modeled on the UA 610), Focus (API), and Shine (Neve), plus a flat/clean setting. The second channel works with guitar, keyboard, and line-level signals. Four knobs change input and output levels; pushbuttons with clear, backlit labels enable phantom power, Direct-monitoring mode, Mute, and the aforementioned Tone selection. All of these controls are single-function, so there's no need to push this first and turn that second just to change one setting.
The Volt 4P Max 12×6 USB-C interface features four Tone Shaping preamps with advanced harmonics modeling to more closely emulate the classic consoles behind the Warmth, Focus, and Shine settings. Also available are Max Compression presets that replicate UA's classic LA-2A and 1176 compressor settings, as well as auto-gain and clip protection. Three separate stereo outputs can feed monitors, alt monitors, and headphones. ADAT optical allows for eight additional input channels, and a USB-C Hub port supports daisy-chaining other USB devices. MIDI I/O and a talkback function round out the unit's capabilities. A colorful, high-resolution Smart Display is married to a singular Smart Knob, which means there's more to see and interact with, but you have to sequence button pushes and knob turns to affect everything from preamp gain to headphone level. Thankfully, these settings and parameters can be tweaked directly within LUNA, and if you're using any other DAW, you can control Volt interfaces through the UAD Console application.
As we wrapped our video shoot, we agreed that the feature set, software integration, build quality, and – most importantly – the sound of these Volt Gen 2 interfaces were all top-notch. Moreover, they come bundled with LUNA Free and 15 UAD Native plug-ins and instruments, plus licenses for third-party software like Melodyne Essential and Ampeg SVT-VR Classic – making an already strong value proposition even better. I'll let Shay take it from here. -AH
From classic hardware to studio-staple UAD plug-ins, Universal Audio has been delivering products for decades that allow Grammy-winning producers and bedroom singer-songwriters alike to achieve great sound quality, regardless of budget. As a once (and oftentimes still) home producer/engineer, I found my original Volt 276 to be a solid interface, so when I was given the chance to try out the new Volt 4P Max, I was eager to find out what makes these new Gen 2 products stand out.
Right off the bat, I was pleasantly surprised by the interface's versatility. In addition to a clean setting, the Tone Shaping preamps deliver three distinct colors. For the project I was recording, I chose to run the vocal through the Warmth preset, which gave it a nice rich sound on the way in. The Max Compression modes also provided a variety of usable options, with each preset fittingly named. "Jangly Acoustic" was light and full-bodied, while "Great Vocal" was a bit more aggressive with emphasis in the highs. I can see how both Tone Shaping and Max Compression could be useful in a DIY or on-the-go situation with a limited selection of mics or outboard gear.
I also found that the Volt 4P Max's integration with LUNA was overall pretty seamless. The controls on the unit are available as settings in the DAW, which facilitated immediate in-the-moment adjustments. It was surprisingly easy to utilize my Volt 876 [Tape Op #171] as an 8-channel input expander, controllable from the 4P Max, once I connected the two via USB-C and ADAT optical. Just be careful once you disconnect them; the 4P Max would not pass audio to LUNA until the ADAT link setting was disabled.
Overall, the Volt 4P Max is a solid step up from the first-generation Volts. It provides tons of useful variations in tonality, is intuitive to set up and use, and contains the typical at-ease reliability of a UA product. Whether it's for remote overdubs or bedroom tracking, the Volt 4P Max is a total workhorse – one of the best USB interfaces in its price range. I will definitely be getting a lot of use out of mine!