You're a musician, right?
Yes, pedal steel is my main instrument, but also guitars, bass, mandolin, a little banjo, and lap steel.
How long did you own your commercial recording studio, Rotund Rascal?
For 27 years. It was a fun studio. A lot of good clients.
Do you miss having that studio?
There are certain things that I miss. I loved my gear, microphones, the board, the tape machines. Some clients I really liked; I really liked some projects. There are some things you don't like. If you are a studio owner, you sometimes have to chase clients for money. Clients come in and break equipment. You're constantly repairing and buying new stuff. That's kind of a drag. Even with consoles, that equipment breaks. I would have to hire guys to come in and fix things. When you're paying people to work on your gear, you find that you've been working all day for free! I thought, "I can do this [repair gear]." I taught myself to do this.
That led to building microphones? It sounds like you were repairing them first?
Yeah, I was repairing them. And once I got into that, I thought, "If I could source parts, I could probably make these." The idea was to build tube microphones that were like [Neumann] U 47s and have a bunch of them in the studio. Then I could tell people, “You can use tube mics on everything.” It became a client magnet. People would come in and see all these mics. I was buying super cheap Chinese mics, gutting them, and using the bodies. I was building my own circuit boards, putting the tubes in, and building power supplies from scratch. People would go, “Where did you get this mic? It sounds so good.” And I'd say, “I just built it in the tech room behind the studio,” and people would ask, “Where can I get one?" I started selling them out of the back of the studio. Before I really knew where to source parts, I was ripping apart old radios and grabbing bits of wire and tube sockets and things. Almost every night, for the first year or two. They were like prototypes with duct tape and pieces of wire! [laughter]
Do you think any of them still exist?
Oh, of course. I get them in for repair. People will send me a mic that's from 2004, and I go, "Oh my god, look at this. I can't believe this thing actually works!" But they said, "It's so good and people love them." I never saved any of this stuff. I've asked a couple of guys, "Will you sell this mic back to me?" And everybody says, "No!" I say, "I'll give you a new mic." "No, we want this one!"
Well, that speaks for itself.
Yeah. I do every mic one at a time by hand, and I'm always like, "I could do this better if I change this a little bit. This just makes it prettier, makes more sense, or it'll work better." Every mic is still a one-off even though I try to make them as similar as possible. But they're still all built one at a time. When somebody orders one, I go in and make it.
You're making your own capsules?
I have been doing that for a bunch of years now for the K-47-type capsules. I have the metal milled for me, and I have 6-micron Mylar gold-sputtered and sent to me. I load the tuning jigs. There's a video on my website where you can watch me putting a capsule together. I build all of those K-47 types myself and tune them all. There's a CK12-type capsule [CT12] I buy from Tim Campbell in Denmark. He makes a great capsule. I'm buying Mylar M7-style ones from Eric Heiserman, and PVC M7-style ones from Thiersch, in Berlin.
Where do you use the M7s?
Those I use in the Church model. That's the mic that Al Schmitt was using. Elton John used that mic, and some high-end clients are buying that model. It's probably the top of the line that I make. Nice sounding mic.
How did you learn to make and skin your own capsules?
Mostly trial and error. I actually watched a couple of other guys doing it. There are certain frequencies at which one can tune the diaphragm. I heard some people say, "This one has too much high mids" or, "This one has a little bit too much lows." I found my own frequency that I like that's kind of proprietary to me. It seems to be working well. Other than that, I have some friends over at Josephson [Engineering, Tape Op #48] who were giving me advice. They said, "Don't poke your screwdriver through the diaphragm. That'll mess it up in a hurry." [laughter] But one of the things is just keeping things super, super clean. You don't want to get dust in there.
I don't think there are a lot of people, especially in the USA, building their own capsules or reskinning them, right?
Right. Part of that is sourcing the material. Getting the DuPont 6 micron Mylar. It's not cheap and you're not going to buy a whole roll to do just one.
Did you have any electronics background?
No, not really. When The Beatles came out, I wanted to play guitar and my dad wasn’t going to buy cables for me. He said, “I'll teach you how to make stuff.” My dad was a radio man in the Navy in World War II. He had a little technical training and taught me how to read schematics and how to solder. When I started getting into it in the early 2000s, I bought stacks of technical electronics books. I spent hours and hours on the internet reading technical journals of microphones, microphone theory, and things that had been translated from German. Then it became trial and error for me. I learned how to read the original Neumann and AKG schematics, and I would try to put things together. I would blow things up and burn things up and shock myself. [laughter] "Oh, that's not going to work. Let me try this." I followed schematics, especially for U 47s, and figured out how to change voltages so it would apply to different tubes. But I pretty much taught myself how to do a lot of that.
It was probably more difficult then because you had to order magazines, books, and papers. Now we go on the internet and there are schematics.
Yeah. For the Church mic, which was originally made by Stanley Church [Chief Sound Engineer at MGM then, Tape Op #107], I had a copy of the original schematic from 1954. I haven't changed it; I just make that mic. I try to get as close to the original parts as I possibly can. I got Triad [Magnetics] to make that original transformer, which was out of production. I got them to make a couple hundred for me.
They still had their drawings and specifications to do that?
Yeah. It’s a slightly different configuration of packaging, but it's the same transformer. Getting all of the original parts – that's one of the things that makes that mic sound so great.
Most of your mics are based on Neumann or AKG classics. They're not always exact clones of the circuits, but more your take on it?
Well, I actually do try to get as close as possible to the original design. I don't want to insert myself into it. I just want it to be what it should be.
If you do have to change something is that due to the original components no longer being available?
Right. And certain voltages, like with the U 47 the original VF 14 tube uses 36 volts on the heater. Where are you going to find a VF 14 that you can experiment with anymore? [These tubes are long out of production. -Ed.] So I have to substitute. I originally started on the original TM-1. I found the EF 14 tube and the VF 14 were similar tubes except for heater voltage. I could experiment with the EF 14s and my original mics were EF 14 tubes with just the filament voltage change and they sounded great. Then I had to find tube substitutes for the EF 14, which are also getting extremely rare and expensive. The TM-47 is pretty much the same schematic, but I've upgraded parts. Paper-in-oil output capacitor and a larger BV8-type output transformer. I use the metal American tubes, which were substitutes for the German metal tubes.
Are those still in production?
No, but they're everywhere. The 5693 [tube] was ubiquitous in American radar installations during World War II. I think there are millions of them around.
Have you always made your own K-47-style capsules?
When I started out, the only capsules were coming from China. They were relatively inexpensive. The problem with Chinese capsules and mics is the quality control. I would buy 50 capsules and there would be some that just weren’t right. It was the same thing with mics. You could buy ten of the same mics and they were all going to sound a little bit different. When I first started, it was all about the Chinese capsules. Later, I tried to stay far away from them. One of the problems was they were tuned so high in frequency that on my earlier mics I incorporated a high-cut switch that started to cut at about 3 to 4 kHz because of that high mid honk that was in those capsules. People would tell me, "Oh, it makes it sound like two different mics." On some of my mics, I’ve left that switch there because people love it so much.
I've got one of the newer, gray body TM-1s and it has that switch. It sounds good.
Sometimes you want that extra high end in there. My own capsules addressed the issue so that super-high mid bump isn't there anymore. But the switch still changes the character of the mic a little bit and people like it.
Yeah, it's good. Depending on the source, sometimes you want to cut that. Some singers are a little sibilant and that helps.
Exactly.
Are you still sourcing parts from outside of the USA?
Because of the current tariffs imposed on metalwork and parts coming from overseas, some things have become financially prohibitive. Other things have been completely discontinued. One of the cases for my TM-47 just got discontinued. I've been using the same carrying case for 20 years. I can't get them anymore. A lot of the prices on the metalwork for the bodies and some of the transformers have doubled in price. When I buy capsules from Thiersch, I get charged about a 25 percent tariff on those now. I have resisted raising my prices for the last couple of years on the mics to make it easier for consumers to buy the mics. But it's cutting into my margins. I still want to stay competitive in the market. I was trying to get a high-quality mic into the hands of end users, and keep that price in a certain range where somebody didn't have to decide, "Am I going to buy a car or am I going to buy a mic?"
How much of the parts do you source locally or from within the USA?
My power supplies are all made here. My guy who builds my metal boxes is here in Los Angeles, but he has to source his metal from somewhere else. He bends the metal and makes it for me. Then he sends it over to my painter, which is also here. They paint and silkscreen the boxes. Then it goes to another guy who's my assembler, who is in Los Angeles County. He assembles my power supplies and then sends them back to me. Everything here is still built in Los Angeles. I buy Mogami cable from Marshall [Electronics], here in Los Angeles. I use Neutrik connectors from Mouser [Electronics], but I think they are manufactured in Europe. All the circuit boards and the parts I buy here and I build them myself. Everything is handmade by me here. I make the cables from the parts that I source. I do buy the metalwork for the [mic] bodies, and it's still coming from overseas. If I had it done here, the mics would be five grand instead of two grand. I just can't get it done here for a reasonable price. When I first started the business, I was borrowing money and loading up credit cards. I couldn't afford the prices that a lot of the manufacturers here in town were charging. I just couldn't do it at all.
You've got the classic mic styles covered, and then you've got the Church mic. I'm not aware of anybody else building one of those.
I love that mic. Telefunken USA was doing it for a minute [Telefunken Elektroakustik Cinemic].
How did that come around?
I was still just building the TM-1, TM-2, and the TM-47 and people were asking me if I could do repairs on certain mics. People started sending me original Church mics from the '50s to refurbish and repair. It was the same thing. I thought, "There's a market for this." I went on the internet, found the schematics, and read all the interviews. I said, "Yeah, I can build this." It took me a little over a year to convince Triad to make that transformer for me. They didn't want to do it. I called them nearly every other day. I'd call them up to the point where I started knowing the names of everybody in the office. "Hey, how are the kids? How was the vacation you took?" And they'd go, "Oh, great. It's Dave calling again about this stupid transformer." [laughter] Finally, after a little more than a year, somebody said, "If we just make this transformer for you, will you stop calling us?"
You wore them down!
After I got the original transformer built, then I figured out I could buy the M7 capsule from Thiersch. That's when I started making that mic. It turns out that there is a market for it because it's a quality, great sounding mic. I try to describe it to people. It's like an original U 47 on steroids. It's that and a bunch more. Originally, MGM was using U 47s and M 49s and they got tired of having to get all their parts from Neumann, looking for VF 14s, and doing all that nonsense. They had a guy, Stanley Church, who designed the amplifier for them. They were still buying the U 47 heads with the M7 [capsules] from Gotham [Audio] in New York, who was the Neumann supplier. But Neumann cut them off when they figured out they were building their own mics! They said, "We're not going to sell these heads to you anymore," which is why there are so few original Church mics in existence.
Out of the mics that you make, which one is your favorite?
The Church mic. I love that one. It's just such a great sounding mic. But getting the parts [Thiersch M7 capsules], sometimes if I forget I have to write a letter to the people in Berlin and say, "Please make a few more for me." But they're expensive so I can't buy 20. I'll buy four at a time or so.
What are your favorite mics overall – not just of the ones you make?
I had 47s and 67s. I had a pair of absolutely beautiful pristine [AKG] C12s with three-digit serial numbers; probably from 1959 or 1960. They were the flagship of my studio. Those were amazing microphones. I got lucky. I started collecting in the '70s. I was buying stuff for nothing. Tube compressors, mic pres, and my Quad-Eight console are now probably worth three to four times what I paid for them. There was a newspaper in L.A., The Recycler, that a lot of people might remember. I used to look at it every week when it would come out. Some guy wrote “drum mics for sale.” He said some were from Germany. I think I was the first guy to show up at his place and he said, "I've got these drum mics, but I don't want to record anymore. I've got these two little mics from West Germany." He pulled them out and they were original [Neumann] KM 84s. And then he had a bunch of Shure SM57s and SM58s. He sold the whole box for $200.
Wow!
That would happen in the '70s and '80s. I would scour the ads and go and find these crazy deals. One of my assistants lived in Camarillo; her next-door neighbor was retiring, and there was a garage full of audio equipment. This woman was in her 80s and just wanted to get rid of it. My assistant called me and said, "She’s got three C12s and a bunch of Sony C37s and a stack of old McIntosh amps. She wants to get rid of all this." I drove up to Camarillo. It took me three trips between L.A. and Camarillo, packing my station wagon to the brim. I ended up with three old stereo McIntosh 270 amps. I sold one of the C12s and it paid for everything else. I don't know if those kinds of things would happen today because of the internet.
Have you built other electronic stuff, besides mics?
There was an old tape recorder company in the '50s called Berlant Concertone. That was one of the things I learned on. I’d find them at yard sales for $20. A tube mic pre from the '50s for $20? That was one of the ways I taught myself how to do this. I would trace the lines and I started building a couple of those. I don't know where they are anymore. They're out there. But I thought, "It's a lot of work to make this." Microphones were so much easier. That's what eventually led me to close my studio after almost 30 years. I was making as much money building a mic that took me a few hours versus the same money working 15 hours at the studio. And you go, "Wait a minute…"
Now you have time for other stuff.
Yeah. I closed the studio and parted everything out. That helped finance the microphone business.
Do you ever have people that you work with, or interns that you're teaching how to do any of this?
Not really. I have a shop here in Canyon Country, CA. It's not big. I work by myself. I crank the music up and sit there and solder all day. It's really not big enough for somebody else. Once in a while, I hire a couple of out-of-work musicians who can solder and I have them make cables for me. That's just time-consuming. I'd rather be building microphones and be able to pull a cable out of a box that’s already built. I've had a couple of guys who want to come up and see what I'm doing. I bring them up and they don't come back; they just want to see me do it. I'm happy to show people, but I don't have anybody working for me.
Do you have anything new you are working on?
I am working on a new C12A-style mic, the short body one, like an [AKG] C414. We had to design a new power supply for that particular model and that's on my website. I've made about 15 or 20 of them that are out in the field right now that people are using. I’m getting really great feedback from them, which is an unfortunate word to use when you're talking about a microphone. [laughter] But again, that's a more expensive mic to make because I'm using Tim Campbell's capsule. I'm trying to make it as original as possible, so I'm using the original Nuvistor tubes. I cornered the market on original sockets from the '60s. I've got a whole bunch of them. We'll see how that goes. It’s also a really great sounding mic. Pete Wasner [piano player with Vince Gill and songwriter for Garth Brooks], who lives in Nashville, now does all his sessions with a pair of my TM-12As. He says it's the best sounding mic he's used on his piano. Merel Bregante [former drummer for Loggins and Messina] has them. I've got a couple of people who are happy to beta test all my mics, and ones who just go, "We're not giving it back to you!"
That means it's a success, right?
Yeah, exactly. Reggie Hamilton, who’s one of the top call bass players in Los Angeles right now, was beta testing one of my original FET mics that I built. He also said he won't give it back. But other than that, I'm gonna do the same stuff. Sourcing parts and getting all this stuff for new mics is getting difficult, and I just turned 70. I'm actually getting tired. I don't know how much new stuff I really want to do.
At some point, you just want to retire and relax, I assume.
Yeah, I could just fix things. I have enough parts on hand for the next 20 years. If things go wrong with my mics, I can fix them. That's another thing; I almost never charge for repairs – I charge for shipping. If somebody's got one of my mics and something goes wrong with it, I don't charge them. If somebody's abusing the mic, a capsule gets ripped, it gets covered in saliva, or if obviously somebody's dropped a mic and things break, I have to charge for that. But for the most part, if a component goes bad, I just charge for the shipping. I don't know why other companies don't do that.
It’s all about profit, I guess.
I know it is. But there's a thing about these microphones – there's so little that can go wrong. Around 99 times out of 100, it's a tube issue. You put a new tube in and the issue’s gone. Sometimes if you put a condenser microphone in front of a kick drum or a jet airplane taking off, you can create holes in the membrane of the diaphragm and moisture can get in and cause the capsule to fail. Again, that's a user mistake. Some of the newer capacitors, they're going to last 50 years. The resistors aren't going to fail. In the Church mic, I have had a couple of those transformers fail, but transformers failing is also super rare. I've only had to replace two since I've been doing this.
Yeah, that's not many at all. You said you were still doing some recording work with people, playing some pedal steel?
Yeah, I have a small [Avid] Pro Tools setup at the house. I do pedal steel and a little dobro. But, not much other than that, really.
Sure, that's the fun stuff.
I don't want to carry my stuff anywhere, so I'm not doing any outside gigs anymore. I don't want to pick up my amps. My wife [Lynn Fanelli] is also a session singer and was a gigging singer for a long time. She used to work with Delaney Bramlett and a bunch of other acts. When she gets a call to do a session, she'll go, “Can you make a mic for me to take to this session?” I'll build a fresh mic for her to take to a studio. When I would do sessions with singers and they would bring in a mic, I loved that because they know what mic they like. They know what sounds good. You don't have to ask a singer, "What mic do you like?" Lynn will bring my mic to a studio and the engineers love it. Also, there have been a bunch of times where I get a sale out of it!
Thanks so much for doing this interview. I really appreciate it.
Absolutely. I'm going to go over to the shop and make one now. I just got an order!